uPVC guttering is the most common choice for UK homes because it’s affordable, widely stocked, and relatively quick to replace. If your gutters are leaking at joints, sagging, overflowing, or the brackets have become brittle over time, a like-for-like uPVC replacement is often the simplest fix.
This home improvement guide covers:
- typical uPVC guttering replacement costs (including per-metre pricing)
- what a “proper” replacement quote should include
- profiles (half-round vs square-line vs ogee vs deepflow)
- a simple regional price comparison
- a DIY option with major UK brands and retailers
Typical uPVC gutter replacement cost (UK)
For professional supply and fit, many UK guttering pricing guides put standard uPVC gutter replacement around £40–£50 per metre.
As a “whole job” guide, a standard 3-bed semi is often quoted around ~£650 in some UK cost summaries.
Use these as budgeting figures — your final price depends on height, access, total gutter length, number of downpipes, and whether repairs are needed to fascias/fixings.
What’s usually included in uPVC gutter replacement?
A decent quote will normally include:
- removal of old guttering and waste disposal
- new gutter runs (lengths), angles, unions, stop ends
- new brackets (often spaced regularly along the fascia)
- outlets and downpipes (or at least outlets, with downpipes replaced as needed)
- alignment and correct fall (so water runs to the outlet)
- sealing/joints where required and a quick flow check
It may not include (unless specified):
- fascia/soffit replacement or repairs
- scaffolding (sometimes priced separately)
- below-ground drain repairs if your downpipe connects to a blocked gully/drain
uPVC guttering replacement costs by property type
| Typical job | Typical price range (guide) | What changes the price |
|---|---|---|
| Small section (front run only) | £250–£700 | Number of corners/outlets + access |
| Typical 2-storey house (full replacement) | £600–£1,800 | Total metres + downpipes + condition of fixings |
| Larger detached / more elevations | £1,500–£3,500+ | Extra runs, corners, outlets, labour time |
| 3-storey / difficult access | £2,000–£6,000+ | Safe access equipment/scaffold, time |
A quick rule: more corners + more downpipes + harder access = bigger quote, even if the house “isn’t that big”.
uPVC gutter profile options (and what to choose)
Most domestic uPVC systems come in a few common shapes.
| Profile | Best for | Notes |
|---|---|---|
| Half-round | Most UK homes | Classic look, good flow, easy to match |
| Square-line | Modern look | Popular on newer homes |
| Ogee | Decorative style | Often chosen for appearance; can have good capacity |
| Deepflow / high-capacity | Bigger roof areas / heavy rainfall | Useful if overflow is a recurring issue |
If your gutters overflow in heavy rain even when they’re clear, you may need:
- a higher capacity profile (deepflow)
- extra outlets/downpipes
- corrected gutter falls (pooling causes overflow)
Biggest cost drivers (what makes quotes jump)
| Cost driver | Why it matters |
|---|---|
| Height and access | 3-storey and awkward access (conservatories below) take longer and may need scaffold |
| Total gutter metres | More length = more materials + labour |
| Corners/angles | Each angle adds fittings and time |
| Number of downpipes | More pipework, offsets, clips, and outlets |
| Condition of fascias/fixings | Rotten timber or weak boards need attention before new brackets hold |
| Previous poor alignment | Fixing falls and pooling is extra labour but worth it |
Regional price comparison (why London is higher)
For uPVC guttering, labour and operating costs tend to be higher in London and the South East. A simple budgeting approach is:
| Region | Typical adjustment vs UK midline |
|---|---|
| London | +20% to +45% |
| South East | +10% to +25% |
| Midlands | baseline to +10% |
| North of England | -10% to baseline |
If you’re using the £40–£50 per metre benchmark, you can roughly expect London quotes to land higher than the same job elsewhere.
DIY uPVC gutter replacement option
DIY can be good value on bungalows, single-storey extensions, and straightforward runs where you can work safely. For 2–3 storey homes, many homeowners still choose a pro for safety and speed.
Common uPVC guttering brands (widely seen in the UK)
- FloPlast (very widely stocked; lots of fittings available)
- Wavin Osma (RoundLine / SquareLine ranges)
- Marshall Tufflex (often seen via specialist stockists/online)
Major UK retailers & merchants for uPVC guttering
- Screwfix (FloPlast ranges and fittings)
- Travis Perkins (Wavin Osma items commonly listed)
(You’ll also commonly see uPVC guttering at Wickes, Toolstation, B&Q and Eurocell, but the two above give clear examples with current pricing.)
DIY materials cost example (to show the scale)
These are examples of current shelf prices, to help you estimate materials:
- FloPlast uPVC half-round 112mm x 3m length listed at £7.38 inc VAT (example).
- FloPlast half-round union bracket listed around £2.50 inc VAT (example).
- Wavin Osma RoundLine 112mm x 4m length listed at £19.93–£21.34 (examples).
DIY budget bands (materials only)
| DIY scope | Typical materials budget |
|---|---|
| Small front run + outlet + short downpipe | £80–£250 |
| Typical 2-storey semi (basic uPVC, multiple lengths + fittings) | £200–£600 |
| Larger home / lots of corners and downpipes | £400–£1,000+ |
DIY often looks cheap until you add: brackets, unions, angles, outlets, offsets, clips, and waste disposal.
DIY shopping checklist (uPVC guttering)
- Gutter lengths (matching system/profile)
- Brackets (enough for the run)
- Unions + stop ends
- External/internal angles (90° / 135° depending on layout)
- Running outlets (to downpipes)
- Downpipe lengths, offsets, clips, shoes
- Silicone/lube as recommended by the system (don’t guess)
- A plan for waste disposal
- Safe access equipment (this is the big one)
DIY tip: don’t mix brands on the same run unless you’re sure they’re compatible — small profile differences can cause leaks.
How to compare uPVC gutter replacement quotes properly
Use this table to stop “cheap” guttering quotes hiding missing items.
| Line item | Quote A | Quote B | Quote C |
|---|---|---|---|
| Total gutter metres included | |||
| Number of downpipes included | |||
| New brackets throughout | |||
| Outlets/offsets/shoes included | |||
| Waste removal included | |||
| Fix falls + test flow | |||
| Guarantee details | |||
| Total price |
FAQs: uPVC guttering replacement cost
How much does uPVC guttering replacement cost per metre in the UK?
Many UK cost guides put professional uPVC replacement around £40–£50 per metre supply-and-fit, but access and the number of fittings can change totals.
Is half-round or square-line cheaper?
They’re often similar in price within the same brand/system. The bigger cost differences usually come from access and how many corners/outlets you have.
Do I need to replace downpipes as well?
Not always, but outlets and downpipes are common blockage points. If your downpipes are cracked, leaking, or poorly flowing, replacing them during gutter replacement is often cost-effective.
Why do some quotes include “minor fascia repairs”?
New brackets need a solid fixing surface. If the fascia is rotten or weak, repairs are necessary to prevent sagging and repeat leaks.
Is DIY worth it?
DIY can be good value on easy-access properties. For 2–3 storey homes or awkward access, professional fitting is usually safer.